Home/Services/Oven & Cooktop Installs
Oven & Cooktop Installs

OVEN & COOKTOP INSTALLS
MELTON & EYNESBURY

A new oven or cooktop only performs when it is wired correctly. Many ovens and most cooktops need to be hardwired on the right size circuit, not just plugged in, so a compliant connection is what keeps it safe and running for years.

DTW installs and changes over ovens, cooktops and freestanding stoves for homes and businesses, including the dedicated circuit and a tidy, compliant connection.

5 year workmanship guaranteeAll installations completed to Australian electrical standardsMelton & surrounds
Oven and cooktop installation by DTW Electrical in Melton
What's included

Licensed Electrician for Oven & Cooktop Installs in Melton & Eynesbury

Oven, cooktop and stove installation
Like for like changeovers and upgrades
Hardwiring and dedicated circuits
Switchboard and circuit size check
Disconnection and removal of old units
Compliance and Certificate of Electrical Safety
Signs you need it

TIME TO CALL IF…

You've bought a new oven or cooktop
You're swapping an old unit for a new one
Your oven or cooktop has stopped working
You're renovating the kitchen
You need an old hardwired unit safely disconnected
The process

OVEN & COOKTOP INSTALLATION PROCESS

01

CHECK CIRCUIT & CONNECTION TYPE

We confirm whether your existing circuit can handle the new appliance or whether a dedicated circuit is needed. We check the connection type and cable sizing before ordering anything.

02

SAFE INSTALLATION & HARDWIRING

The appliance is connected via a dedicated circuit, hardwired in accordance with Australian standards. No piggy backing on existing circuits that aren't rated for it.

03

TEST & SIGN OFF

We test the appliance on all functions, confirm safe isolation and issue a Certificate of Electrical Safety for the connection.

What is involved

OVEN AND COOKTOP INSTALLATION

Cooking appliances are among the heaviest fixed loads in a house, and most of them are supplied hardwired rather than on a plug. That makes the circuit, the isolation point and the certification an electrician's work, not a delivery driver's. A straightforward swap is an hour or two. A first time install with a new circuit is longer.

CIRCUIT SIZING AND LOAD

An induction cooktop can draw considerably more than the ceramic unit it replaced, and a like for like connection to the existing circuit is where trouble starts. The appliance rating plate gets checked against the circuit before anything is connected.

ISOLATION SWITCH

Hardwired cooking appliances need an accessible isolation point so the unit can be switched off for service without pulling the board apart. Behind the appliance does not count as accessible. This is frequently missing in older kitchens.

WARRANTY AND CERTIFICATION

Most appliance manufacturers require installation by a licensed electrician for the warranty to stand, and Victorian rules require a Certificate of Electrical Safety for the work. A cash job with no paperwork can quietly void a warranty on a very expensive oven.

WHAT GETTING IT WRONG COSTS

An undersized circuit on a cooktop trips under load, usually mid dinner and repeatedly. The worse version is a connection that does not trip and instead heats up behind a cabinet where nobody can see it.

GAS COOKTOP, ELECTRIC IGNITION

A gas cooktop still needs an electrical supply for ignition and controls, and the gas connection itself is a separate licensed trade. Where a kitchen is going from electric to gas or the reverse, both trades need coordinating so the appliance is not sitting in a benchtop waiting on one of them. Worth sorting before the delivery date rather than after.

Free quote · No obligation

NEED OVEN & COOKTOP INSTALLS?

Tell us about the job and you'll get a straight answer and an honest quote, fast, with no obligation.

Get a free quote Call Daniel
Common questions

OVEN & COOKTOP INSTALLS FAQs

Do ovens and cooktops need to be hardwired?

Many do. Most cooktops and larger ovens must be hardwired on a correctly sized dedicated circuit by a licensed electrician, rather than simply plugged in.

Can you swap my old oven for a new one?

Yes. We disconnect and remove the old unit and install the new one, checking the circuit is the right size for it.

Can you install both the oven and cooktop?

Yes, we install ovens, cooktops and freestanding stoves, including the wiring and connections each one needs.

Can any electrician install my oven or cooktop?

It must be done by a licensed electrician. Hardwired appliances require a dedicated circuit and a Certificate of Electrical Safety, this can't be done by an unlicensed person or a gas plumber.

Do I need a new circuit for every appliance?

Most high draw appliances like ovens, cooktops and dishwashers should have their own dedicated circuit. We'll assess what's already in place and let you know what's needed.

Where we work

SUBURBS WE SERVICE

Oven & Cooktop Installation available across Melton, western suburbs and beyond. Free quotes, same tradesman every time.